Valentines Origami – Ring with a Heart
Tuesday, February 8th, 2011 - 3:49 pm
Here’s another very creative gift idea for the upcoming Valentines – a ring with a heart. The size of the ring can be easily adjusted with the size of the paper. Make two rings, one for yourself and another for the one you love.
Instructions:
| 1. The length of the side of the square should be approximately equal to the size of the ring you are creating. Divide the square horizontally by 8 equal parts. |
 |
| 2. Fold and unfold the square to create a vertical crease. |
 |
| 3. Turn the paper over and fold top 8th part of the square. |
 |
| 4. Turn the paper back and fold top corners of the square down along the vertical crease. |
 |
| 5. Turn the paper over again and fold the top corner down until the 3rd horizontal crease. |
 |
| 6. Turn the paper over again and lift up the flaps |
 |
 |
| 7. Bring the edges to align with vertical center. |
 |
| 8. Fold the bottom part 1/8th to the next crease |
 |
| 9. Fold the bottom part 3 more times. You will end up with a thick, narrow and sturdy line. |
 |
| 10. Curve the left and right side to form a ring and place them into pockets. |
 |
| 11. Fix it up a bit with your fingers and the ring is ready! |
 |
| 12. You can put your ring in a box like this for a very nice presentation. |
 |
 |
